Is your anti-theft solution effective enough?
- You are worried about the access control of the factory/warehouse, worried about how to well implement the measures to prevent the Covid-19 pandemic.
Securities often encounter many complicated problems in controlling the access of employees, contractors, and vehicles. Especially recently, the temperature check to prevent the spread of Covid-19 always makes managers worry. The entrances and exits to areas and roads are still not properly controlled.
- You want to cut down on security costs.
The increase in the minimum wage leads to an increase in funding for human guard services. Are you paying more than necessary for substandard security services as well as for unnecessary security positions?
- The fire alarm system and equipment of the factory need to be monitored for unusual signals.
Unusual signals of fire alarm terminal cabinets, electrical cabinets and other equipment are only plainly protected and monitored by factory staff? If there is only human supervision, monitoring errors are very likely to occur due to errors of security guards and staff during monitoring.
We will advise and relieve all your insecurities about your security
SECOM solutions
- Detect and mitigate unusual intrusions with multifunction online surveillance cameras.
The motion surveillance camera system installed around the factory will transmit a warning signal at the place of intrusion and transmit the signal to the security guards. This system will help your factory cut unnecessary security costs. Along with that, offices and areas containing high-risk materials will be installed with anti-theft sensors that can be monitored online.
- Manage and retrieve the history of entering and exiting the factory by the Access Control System.
This system helps the factory manage the entry and exit of motorbikes, cars, employees, guests, contractors in each area, and each time. Face recognition devices and card readers are installed at the entrance to strictly control all entrances, restrict internal employees from accessing non-duty areas, preventing any unauthorized intrusion from outside of the factory. The facial recognition devices are integrated with the body temperature measurement to prevent the risk of disease spreading, and easily retrieve the temperature data of employees when entering the factory.
- Online alarm system and fire alarm monitoring
During 24 hours, Secom’s control center will continuously monitor the manufacturing factory, materials, hazardous materials warehouse and office when these areas are unoccupied. In addition to monitoring the anti-theft alarm system, Secom’s control center can monitor your fire alarm system, electrical system and important equipment systems that need 24-hour monitoring. When an incident occurs, the control center will contact the relevant places and send a quick response force to the customer’s location for assistance.
Customers who have effectively used
SECOM's services
Case
Customer A
（Japanese manufacturing factory）
Customer's needs
Although there are security guards, we are always worried whether they will fall asleep in the night shift. Compared to the funding, we are not satisfied with the plan and the effectiveness of the security service, but we do not know how to change it properly.
The solutions by Secom
Customer satisfaction
At first, we hired six security guards from a local security company, but factory security was still not guaranteed – security guards hardly patrolled and monitored security properly. Currently, with Secom’s security plan, in the area around the factory that needs to be monitored and protected, we have installed cameras with alarm function. When an intruder from outside enters the factory, the siren will sound and the alarm light will flash at the place of intrusion, and the signal will be transmitted to the permanent guard depot. Images from the 24-hour cameras are always saved, and images of unusual incidents can also be retrieved easily. Therefore, the number of security guards may be halved, and the cost of security is also significantly reduced. In addition, when the factory is not in operation, the office area and warehouse containing high-value materials will be monitored by Secom’s online alarm system. If an alarm goes off, Secom’s security guards will be dispatched to the site to assist.
Case
Customer B
（Japanese food factory）
Customer's needs
Access control system for employees and contractors
The solutions by Secom
Customer satisfaction
As a food-producing factory, we always want to strictly manage the entry of the factory employees and contractors, but it is not easy to handle the large and unfixed number of people. The security guards hired from a local security company are not permanent, nor do they have much experience, so they cannot build a complete security plan. In response to the spread of the Covid-19 pandemic, it is necessary to measure the temperature of everyone entering the factory, but measuring each person is very time consuming and the measured history cannot be saved. Those problems have now been resolved. The entry and exit of employees and contractors are automatically managed by facial recognition devices and the gate control system. The system also helps measure the temperature of the people entering and retrieves data when needed. Instead of the guards manually recording the access history, the information of the people entering is now accurately saved. The systematization of security has reduced the burden on security guards.
Case
Customer C
（Western milling Factory）
Customer's needs
Because the factory area is too large, and it is surrounded by rivers and canals and large bushes with many dead angles, it is extremely difficult to monitor intrusion. Workers in the factory often take advantage of these dead angles to deliver goods and equipment to the outside, specifically, there has been a motorbike theft through the dead angle of the fence. The cost of security will increase if more security guards are hired to monitor more strictly; however, if the number of guards increases without improving the quality of security services, the problem has not been completely solved.
The solutions by Secom
Customer satisfaction
We have set up a camera system with motion detection alarm; this system has worked very effectively in monitoring the border area of the factory with the outside. The camera’s infrared lasers also help detect intruders hiding behind the bushes to alarm and track the intruder’s movement. When motion is detected, the system will notify the security room to help the guard identify the exact location of the intrusion to respond quickly.
Frequently asked questions
- What is the online alarm service?
Secom’s online alarm service is a service to monitor sensors installed at the customer’s property, which is monitored from the control center via telephone line or internet connection. Intrusion alarms, fire alarms or other abnormal signals will be monitored by Secom’s control center 24 hours a day, 365 days a year. This is a new type of service that completely changes the previous concept of security services in Vietnam.
- What anti-theft plan do we need?
We are capable of providing solutions ranging from security solutions to Covid-19 response solutions based on the scale and sector of our customers. Please rest assured that our experienced security consultants will advise you on the most suitable security solutions.
- What is the difference between Secom and other security companies?
Being a leading security company, total security plans built on SECOM’s experience, knowledge and modern technology always bring safety and peace of mind to all customers.
- What is SECOM PLUS service?
SECOM PLUS is Secom Vietnam newest Alarm service product adapted to customers digitalization requirement, combining our alarm service and CCTV system. With SECOM PLUS, customers can activate/deactivate their alarm system, and watch CCTV footage directly from their smartphone through an application.
